 |
|
|
|
Solution for your Problems:
If you are consuming any brand of CISS System you might be facing three below mentioned problems
1. Blockage of Printer Head
2. Image Fading
3. Light Blinking (due to error)
Blockage of Printer Head & image Fading:-
You must be aware of the fact that Inkjet printing technology is refereed as Spray printing technology. Inkjet printing consists of print head which contains innumerous nozzles which size is in microns. Generally, people think that Ink comes in liquid form but it’s not true as all the Inks for Desktop printers are water base inks. So its clear that color is mixed in water to make the ink , that color comes in powder form, so these powder plays a vital role as they comes with the specific category which in turn provide us the quality & also the display life of the ink is decided on this base.
So the powder particle size has to be NANO if this particle size is bigger than the nozzle size it will for sure block the nozzle head.
Any type of water base inks after manufacturing needs to undergo the filtration process which needs accuracy as the particle size which are bigger in size than the Desktop printer head nozzle size the accuracy level of filtration should be 99.9%to run smoothly like OEM’s & to avoid the blockage of ink in the nozzle.
Foeg: Lyson.com says that while manufacturing of Desktop Inks its color particle category consists of light fastness having a fade resistance from 20 – 80 years. They even say that the accuracy of their filtrations process is 99.9% which is in turn similar to OEM’s & it avoids blockage in nozzle like OEM’s. Let’s set an example of how Lyson means by accuracy in Filtration process. If 100 liters of ink is manufactured than 55 – 60 ltr of ink gets wasted during filtrations process as their particle size appears to be bigger than nozzle size so on an average from 100 liters of ink manufactures on 40 liters are used. So this is called as Accuracy. While if u take into consideration the Chinese & Korean inks than from 100Lts of ink manufactured only 2 – 5 liters of inks are wasted during the filtration process as their machines are set to perform in such typical manner. This is also the prime factor cost of their inks being cheaper. The end result is the Blockage of your printer nozzle as the particle size appears to be of bigger size than the nozzle size.
So you are required to do the cleaning process several times on account of lining problem & by doing your lots of inks get wasted. Later consuming 500 – 600 ml of inks from 1 color your printer head get blockage. So at the end it results that you can never retain it back.
Light Blinking (due to error)
This problem is faced when the installation procedure is not followed as mentioned in the manual. So it is must that one should follow the guidelines to avoid such errors. Secondly, the Pipe (Ink Tube) alignment is not proper OR not fitted as required. Lastly, the Chip in your cartridge is damaged.
Generally, the error faced with Epson printer is that both Light starts Blinking & HP Printer message displayed is Ink System Failure. This problem is occurred due to Waste Ink is full and starts flowing out from the waste pad given in the printer..
You must be aware that inks does the head cleaning process of the printer & these inks gets stored in the waste pad of the printer. Later when this waste pad is full, it displays the message SYSTEM FAILURE and the printer stops printing & final solution is you need to send this printer to the Authorized Service Centre.®
|
|
|
|
|
|